04

2026

-

10

25,000-hour SOEC stack durability results published

Author:

H2 Tech


DynElectro, SolydEra, Aalborg University, and DTU Energy have published results from a 25,000-hour industrial SOEC stack test showing 0.05% degradation per 1,000 hours.

 

The 70-cell SolydEra stack operated with continuous hydrogen production for almost three years using DynElectro’s patented AC:DC operation. The test was conducted at 750°C and −0.5 A/cm².

 

After an initial conditioning period, stack performance stabilized. Over the remaining 22,000 hours, stack voltage rose by 0.05% per 1,000 hours, compared with the EU’s 2030 target of 0.5% per 1,000 hours for solid oxide electrolysis. The average across the full 25,000 hours, including conditioning and periods of conventional DC operation, was 0.23% per 1,000 hours.

 

During conventional DC operation, degradation reached about 11.5% per 1,000 hours. With AC:DC operation, it fell to under 1% during run-in before stabilizing at 0.05% per 1,000 hours during long-term operation. The AC:DC principle periodically reverses stack polarity from electrolysis to fuel cell mode.

 

The authors said that, to their knowledge, the test represents the longest SOEC operation and lowest degradation reported for a full stack. They cited a previous full-stack record of about 9,500 hours.

 

DTU Energy carried out impedance analysis and post-mortem microstructural characterization. Its analysis found that nickel migration, loss of electrical contact in the nickel network, silica contamination, and cracking at the electrode interface had not developed to a measurable extent. All eight monitored cell groups behaved uniformly throughout the test.

 

Søren Højgaard Jensen, Founder and CTO of DynElectro and professor at Aalborg University, said: “This result shows that durability is not only a question of materials but of how the stack is operated. With AC:DC operation, we can make existing, industrial SOEC stacks last long enough for hydrogen from solid oxide electrolysis to become competitive. For DynElectro, the publication is an important milestone on the way to commercialising our Dynamic Electrolyser Units,”

 

DynElectro has integrated the AC:DC technology into its Dynamic Electrolyser Units used in pilot and commercial projects in Europe. The company said it will soon add a 1 MW unit in the Netherlands.

 

Source:H2 Tech

Hot News

FuelCellChina Interviews